home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Precision Software Appli…tions Silver Collection 1
/
Precision Software Applications Silver Collection Volume One (PSM) (1993).iso
/
demos
/
mag6demo.exe
/
M600D2.ZIP
/
MODEMS.TXT
< prev
next >
Wrap
Text File
|
1992-06-09
|
5KB
|
214 lines
This document lists some of the popular modem's startup strings and dip-switch
settings. In order, the modems covered here are:
- US Robotics HST "Dual Standard"
- Multitech 224E(h)
- Hayes 2400
- Multitech 9600 baud V.32 modem
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
US Robotics HST "Dual Standard"
-------------------------------
The Startup Strings and result codes for this modem is listed in the STARTUP.2
file located on your distribution disk as "\MAGNUM\PGM_DIR\STARTUP.2"
LARGE switch labeled CTS: UP
The 10 dipswitches next to that large switch are as follows:
Switch# Setting
1 UP
2 DOWN
3 DOWN
4 DOWN
5 UP
6 UP
7 UP
8 DOWN
9 DOWN
10 UP
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
MultiTech 224E(h)
-----------------
The Startup Strings and result codes for this modem is listed in the STARTUP.1
file located on your distribution disk as "\MAGNUM\PGM_DIR\STARTUP.1"
The dip-switch settings for this modem are as follows:
The 8-switch block on the bottom of the modem:
Switch# Setting
1 UP
2 DOWN
3 DOWN
4 DOWN
5 DOWN
6 UP
7 UP
8 DOWN
The 4-switch block on the inside of the modem:
Switch# Setting
1 DOWN
2 UP
3 DOWN
4 DOWN
All jumpers on the inside of the modem (there's 3 of them) should be jumpered
towards the front two pins. The front is the side where the modem lights are.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Hayes 2400
----------
BAUDRATE: 2400
PARITY: n
DATABITS: 8
STOPBITS: 1
WAITCARRIER: 30
MODEMRESET: AT
STARTUP1: AT &F&W
STARTUP2: AT
STARTUP3: AT S10=7E0V0M0Q0&C1&D2S0=1&W
REINIT: AT
DELAY1: 1500
DELAY2: 1500
DELAY3: 2500
DTELOCKED: n
ANSWERTYPE: a
OPENMODE: n
ANSWERCMD: ATA
ONHOOK: ATH0
OFFHOOK: ATH1
ESC_CMDMODE: +++
ESC_GRDTIM: 700
GO_ONLINE: AT O
END_OFFHOOK: N
RC_110:
RC_150:
RC_300: 1
RC_600:
RC_1200: 5
RC_2400: 10
RC_4800:
RC_9600:
RC_19200:
ERRORCHECK: n
ERC_110:
ERC_150:
ERC_300:
ERC_600:
ERC_1200:
ERC_2400:
ERC_4800:
ERC_9600:
ERC_19200:
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Multitech 9600 baud V.32 modem
-------------------------------------
The dip-switch settings for this modem are as follows:
The 4-switch block:
Switch# Setting
1 DOWN
2 UP
3 DOWN
4 DOWN
The 8-switch block:
Switch# Setting
1 UP
2 DOWN
3 DOWN
4 DOWN
5 UP
6 UP
7 UP
8 DOWN
Startup Sequences:
BAUDRATE: 19200
PARITY: n
DATABITS: 8
STOPBITS: 1
WAITCARRIER: 30
MODEMRESET: AT Z
STARTUP1: AT &F
STARTUP2: AT E0 &E1 &E4 &E15 $SB19200 $BA0 &R1
STARTUP3: AT V0 M1 Q0 X1 S0=1 S2=255 S7=30 &W0
REINIT: AT Z
DELAY1: 1000
DELAY2: 1500
DELAY3: 1500
DTELOCKED: y
ANSWERTYPE: a
OPENMODE: n
ANSWERCMD: ATA
ONHOOK: ATH0
OFFHOOK: ATH1
ESC_CMDMODE: +++
ESC_GRDTIME: 1200
GO_ONLINE: AT O
END_OFFHOOK: N
RC_110:
RC_150:
RC_300: 1
RC_600:
RC_1200: 5
RC_2400: 9
RC_4800: 11
RC_9600: 12
RC_19200:
ERRORCHECK: y
ERC_110:
ERC_150:
ERC_300: 1R
ERC_600:
ERC_1200: 5R
ERC_2400: 9R
ERC_4800: 11R
ERC_9600: 12R
ERC_19200:
===========================================================================
IMPORTANT!
Modem models change very fast. For example, the US Robotics "Dual
Standard" modem we're using is the older modem with v.32 (9600 baud)
capability. The newer "Dual Standard" modems have v.32bis (14400 baud)
capability.
For the fastest possible setup for any modem, once you've filled in your
STARTUPx strings, use Verbose (word) result codes (a V1 anywhere in
your STARTUP strings should turn on verbose result codes). Then:
VERBOSE_CONNECT: CONNECT
(Hayes 9600 baud modems, use VERBOSE_CONNECT: CARRIER)
YMODEMG: Y
and delete all text lines starting with RC_, ERC_, ERCA_, ERCB_
===========================================================================